12.17. MaxOutstandingR2T
12.17. MaxOutstandingR2T
Use: LO
사용: LO
Senders: Initiator and Target
발신자: 이니시에이터와 타겟
Scope: SW
범위: SW
MaxOutstandingR2T=
MaxOutstandingR2T=<숫자 값 - 1에서 65535>
Irrelevant when: SessionType=Discovery
관련없는 경우: SessionType=Discovery
Default is 1.
기본값은 1입니다.
Result function is Minimum.
결과 함수는 최소값입니다.
Initiator and target negotiate the maximum number of outstanding R2Ts per task, excluding any implied initial R2T that might be part of that task.
이니시에이터와 타겟은 해당 작업의 일부일 수 있는 묵시적인 초기 R2T를 제외하고 작업당 미해결 R2T의 최대 수를 협상합니다.
An R2T is considered outstanding until the last data PDU (with the F bit set to 1) is transferred, or a sequence reception timeout (Section 6.1.4.1 Recovery Within-command) is encountered for that data sequence.
R2T는 마지막 데이터 PDU (F 비트가 1로 설정됨)가 전송되거나 해당 데이터 시퀀스에 대해 시퀀스 수신 시간 초과 (섹션 6.1.4.1 복구 내 명령)가 발생할 때까지 미해결 상태로 간주됩니다.